eutampieri

@eutampieri@feddit.it

This profile is from a federated server and may be incomplete. View on remote instance

eutampieri ,

Maybe the kernel? :)

eutampieri ,

Just beware that Affinity won't work well (there's been an attempt with a custom version of Wine that I haven’t tried: https://github.com/daniel080400/AffinityLinuxTut)

eutampieri ,

RTC chip, IIRC

eutampieri ,

I think tauri uses the OS web view, so it depends

eutampieri ,

Also, SAS -> Serial Attached SCSI

eutampieri ,

These are routed networks, and you need avahi reflector set up to mirror between A and PtP and between B and PtP

eutampieri ,

Then I don’t understand your topology.
However, I still think you need the reflector on both routers

eutampieri ,

This works if B has an interface that is connected to the A subnet, but not if you have a PtP between the two routers

eutampieri ,

No, with PtP I meant a point to point link on a dedicated interface just for the two routers.
https://image2.slideserve.com/5192070/point-to-point-sub-interfaces-l.jpg

eutampieri , (edited )

No, not at all 🙂. I'm referring to a configuration in which the two routers are linked through another subnet (using a separate link between the two) and this link is the point to point link. You usually assign a /30 so you can have an address for each router.
This way the traceroute shows three hops instead of just two.
However, since you’ve already told us that this is not your setup, what I’m saying shouldn’t matter to you. If you’re curious though, let’s keep talking :)

Edit: striked mistake

eutampieri ,

Traceroute from device in subnet A to device in subnet B

  • Router A
  • Router B
  • Device B
    Note that the only way to do that in only two hops is to have the same router handle both subnets, contrary to what I said earlier.
eutampieri ,

Hmmm it seems that router B there should be a bridge. However, how comfortable are you with routing in general?

eutampieri ,

Exactly that.
Router A

ip address add 192.168.1.1/24 dev eth1
ip address add 10.0.0.1/30 dev eth2
ip route add 192.168.2.0/24 via 10.0.0.2

Router B

ip address add 192.168.2.1/24 dev eth1
ip address add 10.0.0.2/30 dev eth2
ip route add 192.168.1.0/24 via 10.0.0.1

Does this make it more clear?

eutampieri ,

I definitely agree!

eutampieri ,

Are you licensing your comments?

eutampieri ,

Thanks, I was out of the loop

Teslas Have a Minor Issue Where the Wheels Fly Off While Driving, Documents Show ( 1ft.io )

Tens of thousands of Tesla owners have had the suspension or steering of their vehicles — even in practically brand new ones — fail in recent years. Newly obtained documents show how Tesla engineers internally called these incidents “flaws” and “failures.”...

eutampieri ,

The ones that are safe

eutampieri ,

The first

eutampieri ,

☺️

eutampieri ,

feddit.de/u/mike@flipboard.com

eutampieri ,

kbin.social/u/@mike

eutampieri ,

You can use it as a VDSL modem if you have FTTC internet

eutampieri ,

EarPods are wired headphones

eutampieri ,

iOS Firefox uses the same engine as Safari. Anyway, how should the test behave?

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • All magazines
    •